Grouting Mortar Plaster

Description

• Aralçı Jointing Plaster is a construction
  materialwherethehighqualitynaturalgypsumstone
  iscooked under suitable conditions,
  theseperationprocess is implementedand
  preparedwiththeappropriateimplementation.

Practice Areas

• The plaster is a special fillingmaterial used
  in theapplicationof surfacecoatingwiththe
  jointsof theplatesused with joint tape.

Features

• Gauge, the whiteness and the appropriate
  durationof freezingprovidesan excellent
  opportunitytowork.
  • Creates a smooth surface due to the special
  particledispersion.
  Puttycan beappliedeasilybecauseof
  consistency.
  • No cracking at joints due to its’ flexibility.
  • Bacteria,mold or fungus does not occur.
  • Provide a healthy environment by balancing
  themoistureratio.

Surface Preperation

• •The surfaces Aralçı Jointing Plaster is to be
  appliedshouldbe purifiedfromdust,dirt,oil,
  etc. thatprevent the hold.

Application Instructions

• The container that themortar is to be
  preparedshouldbecleanandbe freeof the
  previousmixture’s residue.
  •Water used and thematerials should be
  considered.
  •Themortar should be prepared a rate of 10 kg
  Aralçı Jointing Plaster into 6.5- 7 litres of water.
  •First water isplaced intothecontainerand
  then Aralçı Jointing Plaster is added. 2-3
  minutesareexpected themortar toabsorb
  thewater.
  •Themixture ismixed with trowel or hand
  mixer throughlyuntil themixturehomogeneousconsistencyis
  achieved.
  If youareusinga handmixer, themixer should
  beused atalowspeedsincethecranking
  speedwilleffect freezing.
  • Until the mixture reaches paste consistency at
  anypoint,mixingprocesscontinues.
  • Another product ormaterial to Aralçı Jointing
  • Plaster should not bemixed.
  • During or after themixture, no water or
  plaster shoulbeaddedtothemixture.
  • Application-ready goods are imported to
  cleanthemortar.Gapsbetweenthewall plates
  with combinationsofpre-fillingprocessare
  covered. Joint tapes are placed to the center of
  theplates before theapplication.
  • Joint tape over homogeneousmixture after
  thefirstcoat isdryandthe surfaceiscorrected.
  • Second floor is applied to the plasterboard
  surface.Surfacegrindingoperation isperformedafterdrying.
  • Polishing is done with plaster Perdah Aralçı
  Satin.
  • After application the surface will become
  smooth, shinyandreadyto paint.

Warnings

• Mixture of water / plaster ratio must be observed.Otherwise, this ratiodegradationspills, mayleadtocrackinganddecreaseinstrength.
  •The application should not be done in very warm,dry andwindy weatherconditions.
  • Applications to be done under very warm weatherconditions mayresult in spilled, fissures andstrengthloss.
  •The products should not be preserved in humid andveryhotconditions.
  • In case of ossification in bags, the products shouldnotbeused.
  •The powder should not be breathed since it contains various chemicaladditivesandplaster. • It should not be in contact with skin and eyes. Incaseofcontact theskinandtheeyes shouldbe washedwith water.Masks, gloves andworkingsuits shouldbe wornduringthe studies.

Storage Conditions

• Aralçı Jointing Plaster bags should be placed
  on topof a maximumof18bags ina dryenvironment.
  Bagswillnotcomeintocontactwith
  theground,mustbe stored toprotect them
  frommoisture. InthesecircumstancesAralçı
  • Jointing should be used within 9months
  after theproductiondate. Improper storage
  conditionsorexceedingthe durationofuse
  candisrupt thequalityof theproduct.

Package

• 30 kg polypropylene laminated bag.

 

Technical Properties:	(23° C and %50 Relative humidity)
General Information
Outlook	:White powder
Shelf Life	9 months indryenvironment inunopenedpackage
Application Information
Application Heat	: (+5° C) – (+35°C)
Mixage Ratio	: 6.5-7 lt water / 10 kg plaster
Performace Information
Usage Time	: 50 -70 minutes
Freezing Time	:160 -180 minutes
Bending Resistance	: ≥ 2 N/mm²
Compression Strength	: ≥ 4 N/mm²
Dry Surface Rigidity	: ≥ 55 SHORE D